Self-Storage Roll-Up Doors
DBCI offers two roll-up doors engineered to suit non-commercial uses.
650 Series
Transform your storage building’s exterior and protects your tenants’ assets with DBCI’s 650 Series steel-curtain roll-up door. Wind-load tested in accordance with IBC, FBC and TDI, the wind-certified 650 Series was engineered to protect and maintain building envelopes in extreme conditions without the heavy, weighted elements required in frequent commercial use.
Product Information
The 650 Series provides tenants and facility or building owners piece of mind with sturdy construction that requires little to no maintenance. Wind-rated up to 8’ 8” and approximately 90 mph, the 650 Series door is ideal in coastal areas that experience large wind gusts and hurricanes, and comes with a 30-year film integrity warranty and up to 25-year chalk and fade warranty. Our 650 Series offers insulation for better energy efficiency and is perfect for climate controlled storage. We also offer top and side draft stop kits to reduce drafts.
Features
Curtain
- 26-gauge galvanized, Grade E hard steel
- 5/8″ ribbed corrugation
- Maximum opening size of 10′ x 10′
- Siliconized polyester WeatherXL™ paint over prime coat
- Available in 23 colors, subject to availability and varying lead times
- 30-year film integrity warranty, up to 25-year chalk and fade warranty
Bottom Bar
- 6063 – T6 aluminum extrusion
- 1 1/2″ x 1 1/2″ galvanized angles
- Replaceable bulb astragal
Axle-Drum Assembly
- 1 5/16″ O.D. steel axle, 14-gauge
- Utilizes 9 1/2″, 18-gauge drums
- Oil-tempered, e-coated torsion springs; available in two springs upon request from 7′ to 10′ wide
- Full-accessible springs for inspection and maintenance
Guide System
- 18-gauge galvanized steel
- Pre-punched holes for anchors, slide latch, bracket attachment and head-stop attachment
- Polyethylene guide strips provide easy, quiet operation
Hardware
- 12-gauge head stops have slotted mounting holes for proper attachment
- 14-gauge galvanized steel handles
- Stainless steel standard latch
- 12-gauge tension bracket made for additional strength
- Shielded radial bearings for smooth operation
- Worm Gear tensioning design allows for smooth adjustment
- 12-gauge bearing bracket on right side.
Options
- Insulated 651 Series
- Top and side draft stop
- Motor operated
- ADA kits
Assets
690 Series
The 690 Series steel-curtain roll-up door is designed to operate smoothly and perform well in severe weather. They won’t buckle, bow, become misaligned from the tracks or separate from the door frame during strong storms and wind events.
Product Information
Featuring 16-gauge galvanized steel guides and a wind bar, the 690 Series is wind-rated up to 10’ and approximately 140 mph—ensuring they meet mini-warehouse wind-load requirements. Our metal roll-up doors are wind-load tested in accordance with IBC, FBC and TDI, allowing facility managers to avoid higher up-front insurance costs and reduce maintenance costs and down-time in the event of a storm. For climate controlled units, our 690 Series offers insulation to help improve energy efficiency along with our top and side draft kits.
Features
Curtain
- 26-gauge galvanized, Grade E hard steel
- 5/8″ ribbed corrugation
- Maximum opening size of 10′ x 10′
- Siliconized polyester WeatherXL™ paint over prime coat
- Available in 23 colors, subject to availability and varying lead times
- 30-year film integrity warranty, up to 25-year chalk and fade warranty
Bottom Bar
- 6063 – T6 aluminum extrusion
- 1 ½” x 1 ½” galvanized angles
- Replaceable bulb astragal
- Axle-Drum Assembly
- 1 5/16” O.D. steel axle, 14-gauge
- Utilizes 9 ½”, 18-gauge drums
- Oil tempered e-coated torsion springs, available in two springs upon request from 7’ to 10’ wide
- Fully accessible springs for inspection and maintenance
Guide System
- 16-gauge galvanized steel guides and windbar
- Pre-punched holes for anchors, slide latch, bracket attachment and head stop attachment
- Polyethylene guide strips provide easy, quiet operation
Hardware
- Stainless steel standard latch
- 12-gauge head stops have slotted mounting holes for proper attachment
- 14-gauge galvanized steel handles
- 12-gauge tension bracket made for additional strength
- Shielded radial bearings for smooth operation
- Worm gear tensioning design allows for smooth adjustment
- 12-gauge bearing bracket on right side
Options
- Insulated 691 Series
- Top and side draft stop
- ADA kits
Assets