DBCI – Heavy-Duty Roll-Up Doors
The integrity, partnership and quality behind the design and production of our heavy-duty commercial doors make them the most durable and reliable in the industry.
2500 Series
DBCI’s 2500 Series is a heavy-duty sheet door suitable for warehouse and freight buildings.
Built to last for years, DBCI manufactures 2500 Series doors with superior materials and a variety of features to increase its versatility.
Product Information
The 2500 Series has deep engagement guides creating greater durability and stronger, longer-lasting performance. Made from 26-gauge galvanized, Grade E hard steel, these doors operate with ease under heavy-duty use.
Features
Curtain
- 26-gauge galvanized, Grade E hard steel
- 5/8″ ribbed corrugation
- Maximum opening size of 18′ x 18′
- Siliconized polyester WeatherXL™ paint over prime coat
- Available in 23 colors, subject to availability and varying lead times
- 30-year film integrity warranty, up to 25-year chalk and fade warranty
Bottom Bar
- 6063-T6 aluminum extrusion
- 2” x 1 ½” galvanized angles
- Bulb astragal
- Stainless steel nuts and bolts
Axle-Drum Assembly
- 1 5⁄16” O.D. steel axle, 14-gauge
- 11-gauge axle on doors over 10’ wide
- Utilizes 12”, 16-gauge drums
- Shielded steel ball bearings in drums
- Full top sheet
- Oil tempered torsion springs
A.C.E. (Advanced Curtain Engagement) guide system
- 14-gauge galvanized steel
- Adjustable bolt on head stop
- Polyethylene wear strip
- Pre-punched for lock and attachment fasteners
Hardware
- Saddle clamps with set fasteners
- 10-gauge slide locks; 2 per door
- 16-gauge step plate; 2 per door
- ¼” steel welded angle T-bracket
- Aluminum “T” shaped lead stop
- Opening Height Headroom
- Doors up to 10’ have 20” of headroom
- Doors 10’ to 14’ have 22” of headroom
- Doors over 14’ have 24” of headroom
Options
- Insulation 2750 Series
- Chain hoist 4:1 reduction
- Vision panels (17” x 5”)
- Top draft stop
- Hood
- Steel mounting plates
- Motor operated
Assets
3000 Series
The wind-certified heavy-duty, commercial-grade 3000 Series door is designed to meet or exceed most wind rating codes.
DBCI’s 3000 Series commercial steel door is built with superior, high-strength materials and engineered to withstand moderate to high wind loads common in many coastal regions.
Product Information
The 3000 Series features ribbed corrugation with an “L” shaped windlock design that grips in place under high pressure, and an 80 degree profile that makes installation easier and faster. It is wind rated up to 16′ wide.
Features
Curtain
- 26-gauge galvanized, Grade E hard steel
- 5/8″ ribbed corrugation with three-rivet windlock attachment
- Maximum opening size of 20′ x 16′
- Siliconized polyester WeatherXL™ paint over prime coat
- Available in 23 colors, subject to availability and varying lead times
- 30-year film integrity warranty, up to 25-year chalk and fade warranty
- Flexible wear strips
- The 3000 Series is wind-rated up to 16′ wide. Ford wind test results, please contact DBCI sales at 800.542.0501
Bottom Bar
- 6063 – T6 aluminum extrusion
- 2” x 1 ½” galvanized angles
- Bulb astragal
- Stainless steel nuts and bolts
Axle-Drum Assembly
- 1 5⁄16” O.D. steel axle, 14-gauge
- 11-gauge axle on doors over 10’ wide
- Utilizes 12”, 16-gauge drums
- Shielded steel ball bearings in drums
- Full top sheet
- Oil tempered torsion springs
A.C.E (Advanced Curtain Engagement) Guide System
- 14-gauge galvanized steel
- 14-gauge wind lock bar
- Adjustable bolt on head stop
- Polyethylene wear strip
- Pre-punched for lock and attachment fasteners
Hardware
- Saddle clamps with set fasteners
- 10-gauge slide locks; 2 per door
- 16-gauge step plate; 2 per door
- ¼” steel angle T-bracket
Opening Height Headroom
- Doors up to 10’ have 20” of headroom
- Doors 10’ to 14’ have 22” of headroom
- Doors over 14’ have 24” of headroom
Options
- Chain hoist 8:1 reduction
- Header seal
- Hood
- Steel mounting plates
- Electric operator
- Insulation (3250 Series), chain hoist, motor operated, vision panels, draft stops
Assets
5000 Series
Wind-rated and available up to 16′ wide, the 5000 Series will last for years with little to no maintenance.
Built to perform against the strong winds caused by tornadoes and hurricanes, the 5000 Series’ durability meets stringent building codes in coastal areas including Florida.
Product Information
DBCI’s wind-rated 5000 Series utilizes deep engagement guides and side curtain windlocks to maintain the operational integrity of the door and comply with most state and local building codes in coastal regions.
Features
- 26-gauge galvanized, Grade E hard steel
- 5/8″ ribbed corrugation with three-rivet windlock attachment
- Maximum opening size of 18′ x 16′
- Siliconized polyester WeatherXL™ paint over prime coat
- Available in 23 colors, subject to availability and varying lead times
- Wash coat over primer interior side
- 30-year film integrity warranty, up to 25-year chalk and fade warranty
- Flexible wear strips
Bottom Bar
- 6063 – T6 aluminum extrusion
- 2” x 1 ½” galvanized angles
- Bulb astragal
- Stainless steel nuts and bolts
Axle-Drum Assembly
- 1 5⁄16” O.D. steel axle, 14-gauge
- 11-gauge axle on doors over 10’ wide
- Utilizes 12”, 16-gauge drums
- Shielded steel ball bearings in drums
- Full top sheet
- Oil tempered torsion springs
A.C.E. (advanced Curtain Engagement) Guide System
- 12-gauge galvanized steel
- 12-gauge wind lock bar
- Adjustable bolt on head stop
- Polyethylene wear strip
- Pre-punched for lock and attachment fasteners
Hardware
- Saddle clamps with set fasteners
- 10-gauge slide locks; 2 per door
- 16-gauge step plate; 2 per door
- ¼” steel angle T-bracket
Opening Height Headroom
- Doors up to 10’ have 20” of headroom
- Doors 10’ to 14’ have 22” of headroom
- Doors over 14’ have 24” of headroom
Options
- Insulated 5250 Series
- Chain hoist 8:1 reduction
- Header seal
- Hood
- Steel mounting plates
- Motor operatated
- Insulation (5250 Series), chain hoist, motor operated, vision panels, draft stops
Assets