Made in the USA
TC400 Rigid Wood Frame
The TC400 series rigid wood frame dock shelter is still the best way to accommodate the widest variety of high volume traffic with varying widths and heights. It has a durable rigid frame of double kiln dried pressure treated lumber, or steel tube framing, with raked header to promote drainage. The TC400 series shelter comes standard with rigid wood frame and fiberglass translucent head & side panels. The flexible side and head panels attached to the rigid frame provide full unimpeded access to the interior of the trailer. Two steel protectors and bottom draft pads are standard.
TC300 Flexible Steel Frame
The TC 300 series flexible steel frame dock shelter services a wide variety of vehicle sizes and types, while providing full unimpeded access to the interior of the trailer. The flexible steel X arm frame yields to misguided vehicles and aids in the prevention of costly building and shelter damage. If an off-center trailer contacts the frame it moves upwards and back to prevent potential damage to the wall and/or shelter. After the vehicle leaves the X arm design returns the frame to its original position. The top is raked to promote drainage and top and sides are covered with a translucent fabric to protect from the elements and permit light to enter. Two steel protectors and bottom draft pads are standard.
TC900 Soft Sided
The TC 900 series soft sided dock shelter services a wide variety of vehicle sizes and types, while providing full unimpeded access to the interior of the trailer. It has durable foam side frames that are mounted to double kiln dried lumber at the wall with removable side curtains attached to high impact polypropylene on inside of foam pads at the face. The TC900 series shelter comes standard with a structurally self supported head canopy that is translucent and raked for drainage. Head and side curtains have ScotchPly® stays. The soft sides on the shelter prevent damage to the shelter from any off center trailers. Bottom draft pads are standard.
TC1000 Weather Sentry™
The TC1000 series Weather Sentry™ rain diverting system is the ultimate answer to water infiltration at the dock. Either as a complete unit when combined with “L” style side pads or as a retrofit head member only that gets mounted over a standard seal, “L” style seal, soft-sided shelter and even a rigid shelter. It tightly seals the entire trailer roof to block out water and provide access to full trailer height. Unique patented head pivot assembly provides automatic positioning and tension for the industries tightest seal. Advanced design stands up to years of dependable service. The TC1000 series is perfect for usage when drive approach slopes into the building allowing rain water to funnel into the dock area. The simple design for easy installation equals an affordable way to protect goods and employees.